LM311P Single High-Speed Differential Comparator PDIP-8
LM311P high-speed single differential comparator in PDIP-8 with open-collector output, ideal for fast voltage comparison and logic interfacing.
6.00 EGP
In stockSKU 9578388901772
Buy Now
Shipping across EgyptDelivered to your door
Cash on deliveryPay when your order arrives
Not sure it fits your project?Ask us on WhatsApp - we reply fast
LM311P Single High-Speed Differential Comparator PDIP-8
The LM311P Single High-Speed Differential Comparator is a precision voltage comparator designed for fast and accurate comparison of analog signals. Packaged in an 8-pin PDIP, this device features a differential input stage and an open-collector output, allowing flexible interfacing with various logic levels and supply voltages. The LM311P supports a wide supply voltage range and delivers rapid response times, making it suitable for high-speed threshold detection, zero-crossing detection, and waveform shaping applications. Its robust design, combined with external output pull-up flexibility, enables reliable operation in both analog and digital systems where precise and fast comparison is required.
Features
- High-speed differential voltage comparator.
- Open-collector output for flexible logic interfacing.
- Wide single-supply or dual-supply operation.
- Fast response suitable for high-frequency signals.
- Differential input stage with good noise immunity.
- Standard PDIP-8 through-hole package.
PINOUT
| Pin Number | Pin Name | Description |
| 1 | EMIT OUT | Emitter Output – This is the Emitter pin of the output transistor |
| 2 | Non-Inverting Input (IN+) | The Non-Inverting Pin of the comparator is give a variable voltage to compare |
| 3 | Inverting Input (IN-) | The Inverting pin is also given a fixed voltage which is compared with the (IN+) |
| 4 | Ground (VCC-) | This pin is connected to the ground of the system (Negative voltage can also be used) |
| 5 | Balance | This pin can be used to turn off the DC-offset voltage |
| 6 | Balance/Strobe | This pin can be used to turn off the output stage |
| 7 | COL OUT | Collector Out – This is the Collector output of the transistor |
| 8 | VCC+ | Provide the operating voltage for the Op-Amp. For LM311 it is upto +15V |
Specifications
Absolute Maximum Ratings
| Parameter(1) | MIN | MAX | UNIT | |
|---|---|---|---|---|
| Supply voltage | VCC+(2) | 18 | V | |
| VCC-(2) | -18 | |||
| VCC+ – VCC- | 36 | |||
| Differential input voltage(3) | VID | ±30 | V | |
| Input voltage (either input)(2)(4) | VI | ±15 | V | |
| Voltage from emitter output to VCC- | 30 | V | ||
| Voltage from collector output to VCC- | 40 | |||
| Duration of output short circuit to ground | 10 | s | ||
| Operating virtual-junction temperature | TJ | 150 | °C | |
| Lead temperature 1,6 mm (1/16 inch) from case, 60 s | 260 | °C | ||
| Storage temperature | Tstg | -65 | 150 | °C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
(2) All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC-.
(3) Differential voltages are at IN+ with respect to IN–.
(4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or ±15 V, whichever is less.
NOTE: for full electrical specifications check the datasheet down below.
Applications
- Zero-crossing detectors.
- Voltage level and threshold detection.
- Pulse and waveform shaping circuits.
- Oscillators and timing circuits.
- Over-voltage and under-voltage protection.
- Digital logic signal conditioning.
Package Contents
- 1x LM311P Single High-Speed Differential Comparator PDIP-8.
Documents
| Datasheet | LM311P |
Related products
