Description
This is a blank 13.56MHz RFID/NFC Card with a mifare classic 1k chip – often used for train/bus passes, information sharing, contactless payment, but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
These can be read by almost any 13.56MHz RFID/NFC reader, but make sure it can handle ISO/IEC 14443 Type A card
This is RFID 13.56MHz Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 1 Meter depending on antenna geometry. Operating frequency is 13.56MHz and Data transfer speed is 106 Kbit/s.
Specifications:
- Contactless transmission of data and supply energy
- Operating frequency of 13.56 MHz
- Data transfer of 106 kbit/s
- Data integrity of 16-bit CRC, parity, bit coding, bit counting
- Operating distance up to 100 mm (depending on various parameters as, e.g., field strength and antenna geometry)
- UID ASCII mirror for automatic serialization of NDEF messages
- Automatic NFC counter triggered at a reading command
- NFC counter ASCII mirror for automatic adding the NFC counter value to the NDEF message
- ECC-based originality signature
- Fast read command
- True anti-collision
- 16.9 pF input capacitance
- Data retention time of 10 years
- Write endurance 100,000 cycles
- 85.5mm x 54mm x 1mm
- 5.3 grams
- Works about 10cm away from reader
Reviews
There are no reviews yet.