Home
Shop
Wishlist0

Roboclaw 2x7A Motor Controller

4,100.00 EGP

Buy Now
Availability: In Stock

The RoboClaw 2x7A is an intelligent motor controller designed to control two brushed DC motors at 7.5 Amps continuous with up to 15 Amps peak per channel. It can be controlled from USB, RC radio, PWM, TTL serial, analog, and microcontrollers such as an Arduino or Raspberry Pi.

RoboClaw automatically supports 3.3V or 5V logic levels, travel limit switches, home switches, emergency stop switches, power supplies, braking systems, and contactors. Power supplies can be used by enabling the built-in voltage clamping control feature. A built-in switching mode BEC supplies 5VDC at up to 1 Amp for powering user devices.

Brushed DC motors can be controlled in open or closed loops using position or velocity control modes. RoboClaw features several built-in commands for controlling acceleration, deceleration, distance, speed, current sense, voltage limits, and more. RC and analog control modes also include several user-defined settings such as acceleration and decelerate speeds.

Dual quadrature encoders with up to 19.6 million pulses per second are supported and can be auto-tuned using Motion Studio which is a free downloadable application. In addition, a wide range of sensor inputs including potentiometers and absolute encoders are supported. RoboClaw’s closed-loop functionality creates absolute control over speed, velocity, and direction regardless of load changes.

RoboClaw incorporates several protection features including temperature, current, over voltage, and under voltage limits. The protection features are self-monitoring and protect RoboClaw from damage in any operating condition. Several user-definable settings such as maximum current limit, and maximum and minimum battery voltages are provided for more refined control.

RoboClaw’s regenerative capabilities will charge a supply battery during a slowdown or breaking. Its advanced circuitry can change direction during full throttle without damage! RoboClaw also incorporates a LiPo cutoff mode to prevent battery damage.

Features
  • Motor Channels: 2
  • Bridge Channels: No
  • Peak Current per Channel: 15A
  • Continuous Current per Channel: 7.5A
  • Max Voltage: 34 VDC
  • BEC: 5 VDC @ 1 Amp
  • 3.3V Safe Outputs: Yes
  • 5V Tolerant Inputs: Yes
  • Quadrature Encoders: Yes
  • Absolute Encoders: Yes
  • Encoder Auto-Tune: Yes
  • Thermal Protection: Yes
  • Current Sense: Yes
  • User Selectable Peak Current: Yes
  • Battery Protection: Yes
  • Regenerative Braking: Yes
  • Over Voltage Protection: Yes
  • Under Voltage Protection: Yes
  • Self Diagnostics: Yes
Control
  • USB: Yes
  • Analog: Yes
  • RS232: Yes
  • RC Pulse: Yes
  • Position Control Mode: Yes
  • Velocity Control Mode: Yes
  • Motor Type: Brushed DC
Mechanical
  • Dimensions: L: 48mm x W: 42mm x H: 17mm
  • Weight: 18 grams
  • Enclosed: Optional
  • Cooling: Convection
Downloads

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart