Solder Wick CP-3515 (W 3.5mm, L 1.5m) (goot -Japan)
High-quality Goot CP-3515 solder wick (3.5mm x 1.5m) from Japan for fast, clean solder removal. Ideal for precision electronics and PCB repair
130.00 EGP
Buy NowFOR LEAD-FREE DESOLDERING
Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.
SPECIFICATIONS
| MODEL | Width | Length |
| CP-3515 | Approx. 3.5mm | Approx. 1.5M |
High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely.
- High-quality cable with braided copper wire.
- The cable is saturated with special chlorine and quickly removes unwanted solder when using a soldering iron.
- When suctioning, only touch the soldering iron and packaging.
- Otherwise there is a risk of burns.
How to use:
- Place the wick over the solder to be removed.Push the heated soldering iron tip onto the wick.The melted solder will be absorbed.
- Remove both the soldering wick and the soldering iron tip from the PCB.
- Use nippers to cut off the used part of the wick
Reviews
There are no reviews yet.