Home
Shop
Wishlist0

WS2812 5050 RGB LED Driver Module Board 8 LED

45.00 EGP

Buy Now
Availability: In Stock
SKU:300000011159

The strip consists of 8 individually addressed RGB LEDs 5050 with an integrated driver. To control the module, one microcontroller’s pin is sufficient. The module length is 57 mm.

Description of LED strip RGB WS2812 5050 x 8 LEDs – 57mm

The strip consists of 8 individually addressed RGB LEDs with an integrated controller. To control the module, one microcontroller’s pin is sufficient, e.g. an Arduino. The LEDs are placed at equal distances on the strip with a length of 57 mm. Each one of the LEDs consumes up to 20 mA, which, in this case, gives a total value of approx. 160 mA. The strip can be powered with a voltage from 4 V to 7 V.

 

 

The used communication protocol allows the serial connection of the LEDs. Another circuit should be connected to the output connector, combining respectively 4-7VDC, GND and DOUT with DIN. The manufacturer notes that when working with more than 500 LEDs, there may not be enough RAM in the Arduino Uno system.

Connection

The device has four leads:
  • GND– module weight
  • VCC – supply voltage, 20 mA current per one LED
  • DIN– digital control signal from the microcontroller
  • DOUT – output to connect the next ring

The product is compatible with Arduino and Raspberry Pi

The product works with the NeoPixel libraries from Adafruit:

Specification: LED strip RGB WS2812 5050 x 8 LEDs – 57mm

  • Supply voltage: 4 V to 7 V
  • Current consumption: approx. 20 mA per LED
  • Applied diodes: LED RGB WS2812 (documentation)
  • Number of LEDs: 8
  • Strip’s dimensions: 57 x 10 mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart