Specification:
————————
– Type: Rechargeable 3S7P
– Voltage: 12V
– Capacity: 12600mAh
– BMS: Included
– Cell: Original used cells
– Battery Type: 18650 Lithium-Ion
– Battery Connector: 5.5 x 2.1mm DC Power connector Female and XT60 Plug Male
Dimensions: 145mm x 75mm x 65mm
| Standard Voltage | 3.7V |
| Full Charge Voltage | 4.2V |
| Rated Capacity | 1500 mAh |
| Discharge Rate | 5C |
| Electronic Resistance | < 17 mΩ |
| Cycle life | 300-800 times |
| Material | Steel/Cooper/Alu/PVC |
| Chemical System | Pure ternary / Lithium cobaltate |
| Demension | 18x65mm |
1x 18650 Li-ion Battery 3.7V 1500mAh 5C (New)
| Standard Voltage | 3.7V |
| Full Charge Voltage | 4.2V |
| Rated Capacity | 2000 mAh |
| Discharge Rate | 10C |
| Electronic Resistance | < 17 mΩ |
| Cycle life | 300-800 times |
| Material | Steel/Cooper/Alu/PVC |
| Chemical System | Pure ternary / Lithium cobaltate |
| Demension | 18x65mm |
1x 18650 Li-ion Battery 3.7V 2000mAh 10C (New)
Specification:
Dimensions: 160mm x 70mm x 75mm
1. The two solder pins can’t Contacting, avoid short circuit.
2. The machine power should be plugged into the wall socket.
3. Please use 30A circuit breaker switch. (40A is better)
Welding Current Reference:
20A circuit breaker switch can use welding current 20
30A circuit breaker switch can use welding current 30
40A circuit breaker switch can use welding current 40
Plug Type: EU Plug, it applies to Indonesia, Germany, France , Spain, Italy and so on.
1 x Spot welder
1 x Foot Switch
100 x Nickel sheet
1 x Hex wrench
2 x fuse
4 pair x Solder pin
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
