Specification:
————————
– Type: Rechargeable 3S2P
– Voltage: 12V
– Capacity: 9600mAh
– BMS: Included
– Cell: Original new Cells
– Battery Type: 18650 Lithium-Ion
– Battery Connector: 5.5 x 2.1mm DC Power connector Male + Female
Dimensions : 70 x 65 x 49 mm
This Module can charge 3×18650 battery at the same time, It contains buck converter LM2596S to step down the input voltage to 5V, 3x Tp4056 for each battery, AMS1117 to output voltage 3.3V and has 3 Leds to indicate the charging status and another 3 Leds to indicate the full charging status.
| Input | Output V1.1 | Output V1.2 | Charge |
| 6V to 36VDC
3AH |
+5V/3A | +3.3V/1A | 3x (4.2V/1A) |
The 18650 Dual SMD/SMT DUAL Battery Holder is made to handle the higher lithium battery supply voltage with a long service life. With the compact size SMD pins, you can mount the holder on your project PCB and power your project without any loose wiring.
This Holder can hold two 18650 cylinders shaped cell to provide separate supply from both cells as slot are not interconnected, It means that the holder can be taken in use as a SINGLE battery Holder also. Additionally, you can easily combine two battery power by doing a series or parallel combination connection simply by soldering the contact points of the Holder from outside as per your project needs
It has ABS external / PC material, insert material is bronze pin environmental protection material. The ABS plastic can handle bearable heat which normal plastic can’t and Stainless steel rustproof shrapnel screens with gold plating will hold the batteries tightly, the installation is very convenient to replace the battery, it will not damage the battery and other parts, convenient and fast, safe and reliable.
| Contact Material | Stainless Steel |
| Plating on Contact Point | Gold |
| Body Material | ABS |
| No. of Cells | 2 |
| Color | Black |
| Mounting Type | SMD |
| Operating Temperature Range (°C) | -40 to 180 |
| Dimensions in mm (LxWxH) | 78 x 40 x 15 |
| Weight(gm) | 18 |
1 x 18650 Dual SMD/SMT DUAL Battery Holder
The all-new High-Quality 18650 SMD/SMT Single Battery Holder is made to handle the higher lithium battery supply voltage with a long service life. With the compact size SMD pins, you can mount the holder on your project PCB and power your project without any loose wiring.
It has High-quality ABS external / PC material, insert material is bronze pin environmental protection material. The ABS plastic can handle bearable heat which normal plastic can’t and Stainless steel shrapnel screens will hold the batteries, the installation is very convenient to replace the battery, it will not damage the battery and other parts, convenient and fast, safe and reliable.
| Contact Material | Stainless Steel |
| Plating | Gold |
| Material | ABS |
| Mounting Type | SMD |
| Number of Cells | 1 |
| Operating Temperature Range (°C) | -40 to 180 |
| Color | Black |
1 x 18650 Battery Holder – SMD- 1 Cell
