PIC16F630-I/P PDIP-14 Microcontroller IC

14-pin, Flash-based, 8-bit CMOS microcontrollers,

high-performance RISC CPU:
• Only 35 instructions to learn
– All single-cycle instructions except branches
• Operating speed:
– DC – 20 MHz oscillator/clock input
– DC – 200 ns instruction cycle
• Interrupt capability
• 8-stage deep hardware stack
• Direct, indirect and relative addressing modes

Microcontroller special features:
• Internal and external oscillator options
– Internal 4MHz precision oscillator, factory calibrated to ±1%
– External oscillator carrier for crystals and resonators
– 5µs wake up from sleep, 3.0V, typical
• Energy-saving sleep mode
• Wide operating voltage range – 2.0V to 5.5V
• Industrial and extended temperature range
• Low power power-on reset (POR)
• Power-on timer (PWRT) and oscillator start timer (OST)
• Brown-out detect (BOD )
• Watchdog Timer (WDT) with independent oscillator for reliable operation
• Multiplexer MCLR/input pin
• Break on pin change
• Individually programmable weak pull-ups
• Protection of programmable code
• High endurance Flash/EEPROM cell
– 100,000 writes Flash- Endurance
– 1,000,000 write EEPROM endurance
– Flash/data EEPROM storage: > 40 years

Low power characteristics:
• Standby current: 1nA @ 2.0V, typical
• Operating current:
– 8.5µA @ 32kHz, 2.0V, typical
– 100µA @ 1MHz, 2.0V, typical
• Watchdog timer current: 300nA @ 2.0V typical
• Timer1 Oscillator Current: 4µA @ 32kHz, 2.0V typical

Peripheral Features:
• 12 I/O pins with individual directional control
• High current sink/source for direct LED drive
• Analog comparator module with:
– an analog comparator
– on-chip programmable comparator voltage reference module (CVREF)
– programmable input multiplexing of device inputs
– comparator output is externally accessible
• Timer0: 8-bit timer/counter with 8-bit programmable prescaler
• Advanced Timer1:
– 16-bit timer/counter with prescaler
– External gate input mode
– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator when INTOSC mode is selected
• In-Circuit Serial ProgrammingTM (ICSPTM) over two pins